Solid Wood Display Case available in Oak or Walnut. Each case comes with brass hinges and locking catch. We also include a layer of foam, and your choice of felt color background. We use two coats of lacquer on our finishes.
Our cases are hand made in USA from high quality solid wood; this custom-made display case is ideal for showing off those expensive keepsakes. Perfect for pocket watches, coins, medals, knives, handguns and many other items. To check out, choose Wood Type, Case Depth, and Felt Color. There is additional cost for Walnut Wood and Deeper Case Depth. Prices will update when you choose your case details.
Displayed description sizes are outside dimensions, the inside dimensions are:
12” X 24” X 2 ¼” = INTERIOR MEASURES 10 ½” X 22 ½” X 1 ¼” (comes with sawtooth hanging kit)
12” X 24” X 3 ¼” = INTERIOR MEASURES 10 ½” X 22 ½” X 2 ¼” (comes with heavy duty hanging kit)
Be sure to consider what size clearance you need on the inside of the case.
Suggestions on displaying a collectible in your shadow box: Lay the case or shadow box on it's back, and open the lid - the foam insert and felt background works excellent as an anchor to hold your items in place. Lay your items on the foam/felt and arrange however you would like to display them, close the lid, and everything should stay in place.
For displaying your handguns on the wall: Request to have your choice of felt color glued to the back of the case, position your gun however you like using rods for balance and mound to the wall. Be sure to follow safe mounting guidelines for the type of wall you have.
For displaying your handguns tabletop or under the bed: This box comes standard with one layer of foam, please request another layer if needed at no additional charge.
Peg Sets: Can be purchased for an additional charge of $10.00 per set. Determine where to place the pegs in the case to support your particular firearm. One choice is to put one peg in the trigger guard of the gun and the other one below the barrel. Placement will vary with your size of weapon. Once placement is determined, drill a small hole through the plywood back (and felt) and put the screws in from the back, with the washers on the OUTSIDE of the back, and the wooden pegs on the inside of the case. Repeat for each peg. Tighten securely using a screwdriver, then place your item in the case.
These pegs/hardware are provided for your convenience. We are not responsible for any damage to the case or it’s contents due to the use, either proper or improper, of these, or any other attachment devices.
Simple and easy!
Custom Built Sizes available.
Free: Shipping, Foam, Felt Color, Hanging Kit and Keys!